Change or rekey · Six Points
Smart Lock Installation in Six Points
You have just taken possession of the house and the previous owners handed over a keypad deadbolt with a code nobody wrote down and an app account you cannot get into. It needs to become yours, properly, or be replaced.
Call now · open 24/7(289) 804-7704In plain words
Smart lock installation puts an electronic deadbolt or lever on your door that opens with a code, a phone, a fob or a fingerprint, and, on some models, a conventional key too. The locksmith confirms you control the property, measures the door and its holes, and makes sure the bolt travels freely, because a battery motor has less strength than a hand. The hardware is fitted with a solid strike, the maker's specified batteries go in, and the lock is set up under your own account. You leave with codes working and, on a keyed model, the override key tested and the old key retired.
How the visit goesHalf the evenings someone asks whether the back door got locked, and nobody is sure. A lock that relocks on its own, shows its state in an app and reports when it was last opened would settle the question.
Smart Lock Installation · Six Points
How the visit goes
- 1
Will the bolt travel on its own?
The most important test takes moments and uses no tools. With the door closed and nobody touching it, the locksmith turns the existing thumb-turn with two fingers and feels whether the bolt glides into the strike or has to be forced. A motor has less strength than a hand, so any drag here is drag the smart lock will fight every day until its batteries give out. Hinges that have let the door drop, a strike pocket that is shallow or off-centre, and weatherstrip that pushes the door out of square are the usual culprits, and each is something the locksmith can correct before the new hardware goes on.
- 2
Preparing the door before the lock
Good installations start with corrections, not with the new box. If the bolt was dragging, the locksmith tightens or replaces hinge screws with longer ones that reach the framing, shims a hinge to lift a dropped door, and dresses the strike pocket so the bolt has room to seat fully. Weatherstrip that pushes the door out of square is trimmed or repositioned. If the existing holes are undersized for the new lock, they are enlarged with a hole saw and a jig so they stay centred; if a mortise pocket from an old lock is in the way, it is filled and re-drilled. The door is then closed and the bolt tested by hand before any electronics are unpacked.
- 3
Batteries, warnings and the cold months
A smart lock runs on batteries, and you leave knowing how that side of it behaves. The locksmith shows where the low-battery warning appears on the lock and in the app, how to swap the set, and which type to buy so the motor gets steady power. Cold shortens battery life, so a fresh set before the first hard frost is a sensible habit, and the alert should go to a phone someone actually reads. If the model has an external emergency power contact, you will have seen it used and know where a nine-volt battery lives for the day it is needed.
In the van
- Adjustable-backset bolt and faceplate
- Smart deadbolt or smart lever set
- Reinforced box strike with long screws
- Hole saw, spade bit and drilling jig
- Hand screwdrivers, Phillips and Torx
What affects the quote
- 1
Rekeying the override cylinder and other locks
Repinning the smart lock's backup cylinder to a new key, cutting the keys and bringing the remaining mechanical locks onto the same key are each counted per cylinder and per key.
- 2
Finish and matching hardware
Standard finishes are the base. A less common finish, or replacing the knob or lever at the same time so the door matches, adds to the hardware portion of the quote.
- 3
Condition and fit of the door
A door that already closes true with standard holes is the simplest install. One that needs hinges shimmed, a strike pocket deepened or holes enlarged adds preparation time, and that work is quoted as its own line.
Same fees day, night or weekend.
Smart Lock Installation: questions
Do I still get a key?
In most cases, yes. The majority of keypad deadbolts keep a conventional cylinder behind or beside the keypad, and the locksmith rekeys it during the visit so a fresh key works and the old one is retired. A few designs have no keyway at all and rely on the keypad plus an emergency power contact instead. Which you prefer is part of choosing the model, and either way the fallback route is tested before the locksmith leaves.
Can I install a smart lock myself?
Many people do, and on a door that already closes perfectly with the standard holes the instructions are manageable. Where a locksmith earns their place is everything around the box: recognizing a bolt that drags before it wears out a motor, enlarging or filling holes cleanly, fitting a reinforced strike, rekeying the override so the old key retires, and setting up the account and codes in a way that is easy to manage later. If you have started and hit a snag, that is a normal call too.
Is a smart lock as secure as a regular deadbolt?
The part that resists force is the same: a steel bolt, a solid strike with long screws and a door that closes true. Smart deadbolts meet the same residential hardware standards as mechanical ones, and a reinforced strike goes in regardless of which you choose. Where a smart lock adds is on the human side: codes that can be revoked and a door that locks itself, plus, on a key-free model, no keys to copy or lose. Good habits, such as unique codes and updates, keep the electronic side tidy.
Smart Lock Installation near you
Toronto, Ontario
Six Points information
- Town
- Six Points, Toronto, Ontario
- In business
- 16 years
- Hours
- Open 24/7 · nights, weekends and holidays, same fees
- Phone
- (289) 804-7704
- Visits
- On-site assessment preferred. Request a visit or call.
What the census means at the door
58%
Older homes. About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.
Where most homes were built decades ago, doors often still carry their original mortise locks and brass knobs. That hardware can usually be cleaned, re-sprung and kept in service, with a modern deadbolt added above it for strength without losing the look.
23%
Single-detached houses make up about 23% of homes in Toronto (2021 Census).
In a building, a lockout happens in a hallway rather than a porch, and the neighbours notice. A locksmith confirms you belong to the suite, opens the door with the least fuss the lock allows, and leaves the door and cylinder intact for the night.
Nearby
Open 24/7
Request a visit
You have just taken possession of the house and the previous owners handed over a keypad deadbolt with a code nobody wrote down and an app account you cannot get into.
Call now · open 24/7(289) 804-7704- On-site assessment preferred
- Same fees day, night or weekend
- 16 years in business