
1 / 9
The old skeleton key still fits the keyhole, but it now needs a jiggle, a lean on the door and a little luck before the bolt moves. Last week it took three tries. You have one key and no idea where a second could come from.

Safely, right now
Safely, right now
Safely, right now
Safely, right now
Running a shop or an office in Six Points means trusting a few people with a few keys. We help you keep track of who opens what: rekeying when staff move on, master key systems that make sense, sturdy commercial hardware on the back door, and exit devices so everyone can leave without hunting for a key.
Same fees day or night · 16 years in business
The fix, explained · Six Points
The fix
A home lockout service is a visit whose whole purpose is to get you back inside your own home when the door is locked against you. The locksmith first confirms you have the right to be there, usually by matching photo identification to the address or seeing a lease, deed or property-management record.
The fix
A business lockout service reopens commercial premises when the door is locked and nobody on site can open it. The locksmith begins by confirming that the person asking for entry has authority to act for the business, through identification and a document or a phone call that ties them to the premises.
The fix
Keys break for a reason, and finding that reason is half the visit. A brass key wears thinnest at its deepest cut, and after years of turning it fatigues there until a cold morning or a stiff bolt finishes it.
The fix
In a rental or condo the repair involves more than one set of hands. A tenant reports the break-in to the landlord or property manager, who normally arranges the work, because landlords are responsible for repairs and both sides have rules about changing locks and sharing keys.
Call (289) 804-7704Request a visit Break-In Damage Lock Repair
The fix
Many jammed locks are not lock problems at all. Wood doors swell in humid weather and shrink in dry winter air, hinges loosen and let the door drop, and a strike plate that was fine in spring is a few millimetres out by autumn.
Call (289) 804-7704Request a visit Seized & Jammed Lock Opening
The fix
How much a lost key matters depends on what was lost with it. A ring that dropped into a lake on a canoe trip tells nobody where it fits, so the rekey is a tidy precaution.
Call (289) 804-7704Request a visit Lost Keys — Same-Visit Rekey

When you call from Six Points, a locksmith answers, not a dispatcher reading a script. He asks what the door is doing, tells you what the visit will likely involve, and arranges a time. The assessment and the price happen at the door, once he has seen the hardware. The same person who took the call is the one who does the work.
Toronto, Baby Point, Chestnut Hills, Humber Bay, Humber Valley, Humberside, Lambton Mills, Old Mill and The Kingsway
Identity checked, politely. For openings and key work we confirm you have the right to be there. We explain why we ask, and we ask everyone.
Work you can watch. There is nothing hidden about what we do. Stand beside us, ask questions, and we will show you what the lock looks like inside.
Clean hands, clean floor. We put down a mat where there is drilling, wipe the hardware down and leave the area as we found it, only with a working lock.
Call to discuss your business's keys: (289) 804-7704
Six Points
Whether you own a home in Six Points, run a shop or manage a few rental units, the lock services here are organised the way people actually ask for them. Start with the problem you have today, and read on to see what else on the door might deserve a look while a locksmith is already there.
Bigger photo, sooner job: Emergency Book soon Plan ahead
Vintage Mortise Lock Service
Smart Lock Installation
Plan aheadSafe Installation & Servicing
Plan aheadAccess Control Installation
Commercial-Grade Lock Replacement
EmergencyCar Lockout ServiceThe trunk is full of groceries, the cart is back in its corral, and the keys are sitting in the cup holder in plain view.
Ignition Lock Repair
Motorcycle & Scooter KeysSound familiar?

1 / 9
The old skeleton key still fits the keyhole, but it now needs a jiggle, a lean on the door and a little luck before the bolt moves. Last week it took three tries. You have one key and no idea where a second could come from.

2 / 9
The rental turns over every few months and each time you drive across town to swap keys, then wonder whether copies were made. A lock with codes you can set and erase from your phone would end that cycle.

3 / 9
A community group counts the weekend's raffle and bake-sale cash on a kitchen table, then carries it home in a tote bag until the bank opens Monday, because there has never been anywhere safer to leave it.

4 / 9
After the attempted break-in the police officer pointed at your door and said the strike plate was held by two short screws. Nobody got in, but you have looked at that door differently every evening since.

5 / 9
You just leased the empty unit next door and want the new tenant to open their own suite without a key to yours, to the loading dock, or to the electrical room down the hall.

6 / 9
Head office wants every branch keyed alike under one system, and half the locations are still running whatever lockset the original contractor happened to install years ago.

7 / 9
The rental van came with one key. It went into the door lock, turned partway, and snapped, leaving half the blade in the cylinder and the other half in your hand. The delivery is due, the van is locked, and the rental desk is an hour away.

8 / 9
The key turned the engine off in the driveway and now refuses to come back out. Wiggling it, pushing the shifter through every gear again, even leaning gently on the wheel; the barrel keeps holding on to it regardless.

9 / 9
You dig through every jacket pocket and the tank bag twice, but the ignition key that always sits on the same ring is nowhere to be found. The bike sits exactly where you parked it, and nothing in reach will turn that lock.
Toronto, Ontario
Access Control Installation, Vintage Mortise Lock Service, Smart Lock Installation, Ignition Lock Repair, Commercial-Grade Lock Replacement, Motorcycle & Scooter Keys, Safe Installation & Servicing, Car Lockout Service and High Security Locks
58%
Older homes. About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.
Where most homes were built decades ago, doors often still carry their original mortise locks and brass knobs. That hardware can usually be cleaned, re-sprung and kept in service, with a modern deadbolt added above it for strength without losing the look.
23%
Single-detached houses make up about 23% of homes in Toronto (2021 Census).
In a building, a lockout happens in a hallway rather than a porch, and the neighbours notice. A locksmith confirms you belong to the suite, opens the door with the least fuss the lock allows, and leaves the door and cylinder intact for the night.
Rarely, and it is not the better route. Almost everything that fails is inside the case, and the case only opens once it is out of the pocket, which takes a few minutes and leaves no mark. Working through the keyhole with an unapproved or over-applied spray tends to wash out what little lubricant should stay and gums the levers later. Removing the case, cleaning it properly and refitting it is the repair that lasts.
Many people do, and on a door that already closes perfectly with the standard holes the instructions are manageable. Where a locksmith earns their place is everything around the box: recognizing a bolt that drags before it wears out a motor, enlarging or filling holes cleanly, fitting a reinforced strike, rekeying the override so the old key retires, and setting up the account and codes in a way that is easy to manage later. If you have started and hit a snag, that is a normal call too.
Yes, provided the spot chosen still allows full anchoring and enough clearance for the door to swing open completely. A closet floor, the back of a built-in cabinet, or a recessed wall cavity can all work, though each limits the size of unit that will actually fit and reach the anchor points properly. Balancing concealment against how often the safe gets opened is worth discussing before a spot is chosen.
The mechanical resistance of the cylinder does not change, but blanks may become openly available, so copy control weakens. Manufacturers issue new patented keyways as older ones expire, and the usual answer is to move to the next generation by changing cylinders and keys while keeping the lock bodies. Your locksmith notes the patent term at handover so the date is on the calendar rather than a surprise years later.
Open 24/7
Set up a visit to your home in Six Points
Call now · open 24/7(289) 804-7704Menu
What is the door doing?
Services